Service Parts; Check Safety Interlock System; Hydraulic System - Gravely Pro-QXT Tractor 985910 Operator's Manual

SERVICE PARTS

See your Gravely dealer to purchase service
parts for your unit.
Description
Air Filter
Spark Plug
Transaxle Oil Filter
Hydraulic Oil – Qt
Electrical Relay
Attachment Drive Belt
Transaxle Drive Belt
Fuel Stabilizer – 4-Oz
Bottle (Except Canada)
Fuel Stabilizer – 4-Oz
Bottle (Canada Only)
Fuel Quality Tester
Touch-up Paint – Bottle
Touch-up Paint – Spray
Can
CHECK SAFETY INTERLOCK
SYSTEM
See Before Operation on page 12. If system
does not operate correctly, see your Gravely
dealer for repair. DO NOT operate until
repairs are made.

HYDRAULIC SYSTEM

Check Oil Level
1. Park unit on a flat, level surface.
2. Check oil level in expansion tank. Oil
should reach the cold fill indicator mark.
See Figure 16.
NOTICE: The engine should be cold when
initially checking oil level.
Qty. Part No.
1 21562100
1 20020001
2 21545100
AR 00057100
3 21562300
2 09122000
1 09122100
AR 04730300
AR 04742400
AR 00078101
AR 00026600
AR 00008700
EN - 16
1. Cold Fill Indicator Mark
Figure 16
3. Operate unit for about 1 minute and
recheck the levels.
4. Add hydraulic oil, if needed.
a. Clean area around expansion tank
cap and remove cap.
b. Fill expansion tank with 15W-50
synthetic motor oil (Gravely
p/n 00057100) or equivalent until oil
reaches the cold fill indicator mark.
See Figure 16.
c. Reinstall tank cap.
Change Oil and Filters
1. Start engine and operate unit with
operator presence lever engaged for a
few minutes to warm hydraulic oil.
2. Stop engine, remove key and wait for all
moving parts to stop.
WARNING: AVOID INJURY.
ALWAYS ensure that jack stands
are secure and strong enough to
support weight of unit during
maintenance
See Figure 17.
3. Lift unit and support with suitable jack
stands or sturdy blocks. See Lift Tractor
Using Lift Point on page 15.
4. Remove wheel.
5. Remove side cover.
1