Maintenance; Maintenance Schedule; Service Parts; Check Gearcase Oil - Gravely 885914 Operator's Manual

36" finish mower attachment
Table of Contents

Advertisement

See Figure 19.
4. Rotate attachment lever lock forward to
release.
5. Rotate attachment lever forward.
6. Release attachment lever lock and rotate
bow latch toward tractor.
7. Remove mower attachment.
3
1. Attachment Lever Lock
2. Bow Latch
3. Attachment Lever
Figure 19

MAINTENANCE

WARNING: Read and
understand the Safety section
before proceeding.
Proper maintenance can prolong the life of
unit. The following chart shows the
recommended service schedule.
Your Gravely dealer can provide service and
adjustments to keep your unit operating at
peak efficiency. Contact an authorized engine
manufacturer's service center for engine
service.
More frequent service may be required due to
working conditions (heavy loads, high
ambient temperatures, dusty conditions, or
airborne debris).
See the maintenance instructions in the
Engine Manual for additional information.
IMPORTANT: Refer to Pro-QXT Tractor
Operator's Manual for tractor-specific
maintenance information and procedures.
1
2
EN - 17

MAINTENANCE SCHEDULE

Service Performed
Check Fasteners
Change Gearcase Oil
Lubricate Unit
*Change gearcase oil after first 25 hours and
every 400 hours thereafter.

SERVICE PARTS

See your Gravely dealer to purchase service
parts for your unit.
Description
Gravely Hi-Temp Grease
• 3 oz. cartridges (3)
• 14 oz. cartridge (1)
Mower Drive Belt
Mower Blades

CHECK GEARCASE OIL

See Figure 20.
1. Place unit on a flat, level surface.
2. Loosen but DO NOT remove hex bolts
securing mower deck shield to frame.
3. Slide shield forward until front hex bolt
heads are positioned in square slots.
4. Remove mower deck shield and retain for
reinstallation.
1
1. Mower Deck Shield
Figure 20
•*
Part No.
00036800
00036700
07237700
00450300
1

Advertisement

Table of Contents
loading

Table of Contents