Assembly - Gravely Pro-QXT Tractor 985910 Operator's Manual

ASSEMBLY

1. Remove tie-down straps from front and
rear of unit.
2. Remove straps retaining adjustable
handlebar to unit.
3. Rotate handlebar into operating position.
See Adjust Bow Latch on page 24.
WARNING: AVOID INJURY.
Ensure that lifting device, cables
and hooks have sufficient
capacity to support tractor.
4. Remove screws retaining tractor support
stand to crate. Using a suitable hoist, lift
the unit from the pallet. See Lift Tractor
Using Lift Point on page 15.
NOTICE: If a hoist is not available, remove
the top rear boards from the pallet and move
the unit manually. See Move Unit Manually on
page 13.
5. Check engine oil.
6. Check tire pressures. See Specifications
on page 33.
WARNING: AVOID INJURY.
Explosive separation of tire and
rim parts is possible.
• DO NOT inflate tires above
the recommended pressure.
• DO NOT inflate tires with a
compressor; use a hand
pump.
• DO NOT stand in front of tire
assembly when inflating. Use
a clip-on chuck and extension
hose long enough to allow you
to stand to one side.
• DO NOT mount a tire without
proper equipment and
experience.
7. Remove battery from unit and charge.
See Charge Battery on page 19.
8. Ensure all hardware is tight.
9. Check function of all controls. See Before
Operation on page 12.
WARNING: AVOID INJURY.
Failure of Safety Interlock
System together with improper
operation can result in severe
personal injury.
EN - 8