3e Technologies International 3e-525A User Manual page 93

3e-525A Wireless Access Point
Direction
Wireless Configuration – General
SSID
Channel
Wireless Configura-
tion – Encryption
Wireless Configuration – Bridging
Channel
Tx Power Mode
BSSID
Wireless Configu-
ration – Bridging
Encryption
With this configuration, each bridge can control a wireless LAN. All
wireless clients must have the same SSID as the bridges on the AP card
channel. All clients can roam between the three bridges.
All other setup screens should be completed following the guidelines
in Chapter 3.
84
Bridge 1 Bridge 2
default (or set for default (or set for
802.11b/g WLAN) 802.11b/g WLAN)
11 11
Select appropriate Select appropriate
key type and length key type and length
and enter key value and enter key value
4 4
Auto Auto
Add Bridge 2's Add Bridge 1's and
BSSID Bridge 3's BSSID
Select appropriate Select appropriate
key type/length key type/length
and enter key and enter key value.
value. Must be the Must be the same as
same as that on the that on the other 2
other 2 Bridges. Bridges.
Bridge 3
default (or set for
802.11b/g WLAN)
11
Select appropriate
key type and length
and enter key value
4
Auto
Add Bridge 2's BS-
SID
Select appropriate
key type/length
and enter key value.
Must be the same as
that on the other 2
Bridges.
29000132-001 A