3e-525A Wireless Access Point
Broadcast SSID Enabled/
disabled
Encryption
The default factory setting for the 3e-525A AP in gateway mode is no
encryption but for security reasons it will not communicate to any clients
unless the encryption is set by the administrator. It is recommended that
you set encryption as soon as possible.
No Encryption
In order to use the 3e-525A with no encryption, you must actively
select None and click Apply. A screen will appear, asking if you really
want to operate in Bypass mode. If you answer Yes, no encryption will be
applied.
Static WEP Encryption
Using the 3e-525A AP in gateway mode allows you to employ the
WEP (RC4) encryption standard if you wish. If using WEP, authentication
type can be set to Open System, Shared Key or a combination of Open/
Shared.
54
When disabled, the AP hides the SSID in outgoing
beacon frames and stations cannot obtain the SSID
through passive scanning.
Also, when it is disabled, the AP doesn't send
probe responses to probe requests with unspecified
SSIDs.
29000132-001 A