3e Technologies International 3e-525A User Manual page 30

Advanced Options
Beacon interval
RTS Threshold
Fragmentation
DTIM
Basic Rates
Supported Rates
Preamble
Broadcast SSID
29000132-001 A
0-4095 The frequency in milliseconds in which the
802.11 beacon is transmitted by the AP.
0-3000 The number of bytes used for the RTS/CTS
handshake boundary. When a packet size is
greater than the RTS threshold, the RTS/CTS
handshaking is performed.
256-2346 even Fragmentation boundary in bytes.
only
1-65535 The number of beacon intervals between suc-
cessive Delivery Traffic
Identification Maps (DTIMs). This feature is
used for Power Save Mode.
Basic Rates for 802.11b
- 1 and 2 Mbps The basic rates used and reported by the
AP. The highest rate specified is the rate that
- 1, 2, 5.5 and
the AP uses when transmitting broadcast/
11 Mbps
multicast and management frames.
Basic Rates for 802.11g or 802.11b/g mixed
- 1 and 2 Mbps The basic rates used and reported by the
AP. The highest rate specified is the rate that
- 1, 2, 5.5 , 11,
the AP uses when transmitting broadcast/
12, and 24
multicast and management frames.
Mbps
Supported Rates for 802.11b
All Rates The rate at which all data frames will be
transmitted
1 Mbps
2 Mbps
5.5 Mbps
11 Mbps
Supported Rates for 802.11g or 802.11b/g mixed
All Rates The rate at which all data frames will be
transmitted
1 Mbps
2 Mbps
5.5 Mbps
11 Mbps
12 Mbps
18 Mbps
24 Mbps
36 Mbps
48 Mbps
54 Mbps
Short/Long Specifies whether frames are transmitted with
Preamble the Short or Long Preamble
Enabled/ When disabled, the AP hides the SSID in
disabled outgoing beacon frames and stations cannot
obtain the SSID through passive scanning.
Also, when it is disabled, the AP doesn't
send probe responses to probe requests with
unspecified SSIDs.
21