3e-525A Outdoor Access Point
• Use IPv6 Mode
If you can select the Use IPv6 Mode, the AP will be configured to
support IPv6 addresses on the WAN and LAN ports. In IPv6 mode, the
AP can be managed and pass traffic using IPv6 addresses. Since IPv6 is
relatively new in the industry, some networking functions that cannot
support IPv6 are disabled such as DHCP server and WPA-802.1x
If Use IPv6 mode is selected as a submode then you will need to enter
a IPv6 address under System Configuration—WAN and LAN screens.
18
29000132-001 A