Logging; Log Message Filtering-General - Allied Telesis AR Series Technical Manual

Logging

Logging
This section gives a brief summary of what you can log in AlliedWare Plus devices, including how to
read AlliedWare Plus log messages, followed by details about logging for each of the UTM features,
and a simple configuration example.

"Log Message Filtering—General" on page 64

"Reading Log Messages" on page 65

"Firewall Log Messages" on page 65

"UTM Log Messages" on page 66

"IPS Log Messages" on page 67

"IP Reputation Log Messages" on page 68

"Malware Protection Log Messages" on page 68

"URL Filtering Log Messages" on page 69

"Web Control Log Messages" on page 71

"Anti-virus Log Messages" on page 71

"Firewall Connection Logging" on page 72

"UTM Offload Logging" on page 74
For detailed information about configuring logging, see the
Configuration Guide
product.
Log Message Filtering—General
You can selectively log messages generated by AlliedWare Plus according to the severity level, the
program that generates them, the facility assigned to them, or a specified string contained in the
message. This allows you to select and log all the messages of particular severity levels or for a
particular feature or facility with a single filter.
C613-22104-00 REV B
and the 'Logging Commands' chapter in the
Advanced Network Protection
Logging Feature Overview and
Command Reference
Log Message Filtering—General
for your
|
Page 64