Allied Telesis AR Series Technical Manual page 49

Configuring URL filtering
Using multiple whitelists and blacklists
The AR-Series firewall support pattern checking against multiple whitelists and multiple blacklists.
Multiple custom whitelists or blacklists can be configured and checked as follows:
awplus(config)#url-filter
awplus(config-url-filter)#blacklist blacklist1.txt
awplus(config-url-filter)#blacklist blacklist2.txt
awplus(config-url-filter)#blacklist blacklist3.txt
awplus(config-url-filter)#whitelist whitelist1.txt
awplus(config-url-filter)#whitelist whitelist2.txt
awplus(config-url-filter)#whitelist whitelist3.txt
awplus(config-url-filter)#protect
You can check the configuration using the show url-filter, show running-config url-filter and dir
commands:
awplus#show url-filter
Status:
Provider:
Custom blacklists
blacklist1.txt
blacklist2.txt
blacklist3.txt
Custom whitelists
whitelist1.txt
whitelist2.txt
whitelist3.txt
awplus#show running-config url-filter
url-filter
blacklist blacklist1.txt
blacklist blacklist2.txt
blacklist blacklist3.txt
whitelist whitelist1.txt
whitelist whitelist2.txt
whitelist whitelist3.txt
protect
!
awplus#dir
C613-22104-00 REV B
Enabled (Active)
not set
Entries
18
23
39
Entries
11
26
33
107 -rw- May 11 2016 04:52:44
229 -rw- May 11 2016 04:52:39
318 -rw- May 11 2016 04:52:32
372 -rw- May 11 2016 04:51:50
202 -rw- May 11 2016 04:51:38
170 -rw- May 11 2016 04:51:31
whitelist1.txt
whitelist2.txt
whitelist3.txt
blacklist3.txt
blacklist2.txt
blacklist1.txt
Advanced Network Protection
|
Configuring URL Filtering Page 49