Configuring Url Filtering - Allied Telesis AR Series Technical Manual

Configuring URL filtering

Limits
URL filtering is limited to 1000 custom whitelist and 1000 custom blacklist rules, spread over any
number of list files.
Configuring URL Filtering
URL filtering is turned on by configuring a whitelist that uses a custom file, a blacklist that uses a
custom file, or blacklisting that uses the Kaspersky service.
1. To add a whitelist that uses a custom file (that is stored on USB, for example) and then enable
URL filtering, use the commands:
awplus#configure terminal
awplus(config)#url-filter
awplus(config-url-filter)#whitelist usb:/my_whitelist.txt
awplus(config-url-filter)#protect
2. To add a blacklist that uses a custom file (that is stored on Flash, for example) and then enable
URL filtering, use the commands:
awplus#configure terminal
awplus(config)#url-filter
awplus(config-url-filter)#blacklist flash:/blacklist-example.txt
awplus(config-url-filter)#protect
3. To add a blacklist provided by Kaspersky and then enable URL filtering, use the commands:
awplus#configure terminal
awplus(config)#url-filter
awplus(config-url-filter)#provider kaspersky
awplus(config-url-filter)#protect

awplus#show url-filter
Status:
Provider:
Status:
Resource version:
Update interval:
Blacklist entries:
Custom blacklists
blacklist-example.txt
Custom whitelists


C613-22104-00 REV B
To check that Kaspersky is active, enter the command show url-filter:
Enabled (Loading)
Kaspersky
Enabled
not set
1 hour
-
Entries
Entries
Invalid entries in URL filter lists are ignored (not loaded).
Expiry of the Kaspersky URL Filtering Subscription License will cause URL filtering to reload
without a Kaspersky blacklist.
3
Advanced Network Protection
|
Configuring URL Filtering Page 48