Configuring Ip Reputation - Allied Telesis AR Series Technical Manual

Configuring IP Reputation

Configuring IP Reputation
This section shows an example of how to configure IP Reputation.
By default, IP Reputation protection is disabled and you need to explicitly enable it
Step 1:
awplus#configure terminal
awplus(config)#ip-reputation
Step 2:
awplus(config-ip-reputation)#provider proofpoint
Step 3:
awplus(config-ip-reputation)#protect
Step 4:
awplus(config-ip-reputation)#category P2P action deny
Step 5:
awplus#show ip-reputation
Output 3: Example output from the console
awplus#show ip-reputation
Status:
Provider:
Resource version:
Resource update interval: 1 hour
C613-22104-00 REV B
Enter the IP Reputation mode.
Set the IP Reputation database provider.
Enable IP Reputation protection.
(Optional) Configure action for a category.
Verify IP Reputation configuration.
Enabled (Active)
Proofpoint
1.0
Firewall/NAT Rules, Entities and Performance
Advanced Network Protection
.
|
Page 36