Wavion WBS-2400 Installation Manual page 27

1. Remove the nut and star washers from the grounding screw.
Grounding Screw
Figure 3.16 Grounding Screw
2. Attach one star washer to the grounding screw.
3. Attach #10 AWG bare copper wire with an M6 terminal ring to the grounding screw.
Attach wire to
grounding
screw
4. Attach the second star washer and tighten the nut.
5. Attach the other end of the grounding wire to a grounding strap that is attached to a
grounded surface or other earth ground (for example, a grounding rod).
Installation Guide 27