Wavion WBS-2400 Installation Manual page 22

Figure 3.9 Wood Brace Mounting Option
You can attach the WBS-2400 to any wood brace.
Note
the WBS-2400 weight plus wind loading. Please see Chapter 9 for wind
loading considerations.
To mount the Wavion WBS-2400 on a wood brace:
1. Select a mounting location.
2. Attach the tray directly to the wood brace using four 5/8 inch diameter, 3 inch long lag
bolts as shown in 0. Use an appropriate Allen wrench to tighten the bolts. Make sure
that the wood brace is level.
Figure 3.10 Tray Mount for Wood Brace
22 Wavion Networks
Before attaching the WBS-2400 make sure that the wood can support
Insert Bolts