Scan Camera; Warning Volume Setting - Infant Optics DXR-6 User Manual

TIP: Quick method to cycle through CAM channels
Quick method to view desired camera instead of entering into the menu bar: directly press OK
button to cycle through paired cameras: cam 1 / cam 2 / cam 3 / cam 4 / scan(x).

5.6.4 Scan camera

This function automatically cycles through your paired camera channels to display each
camera for 10 seconds. This function is only useful if you have more than 1 Camera Unit
paired.
1. Press the MENU button and the menu bar will pop up.
2. Press the (icon) LEFT button or (icon) RIGHT button until
and the del/add/view/scan menu will pop up.
3. Press the (icon) UP button or (icon) DOWN button to select (icon) icon, and press the
OK button to confirm.
4. The screen will then display the video from different paired cameras in a loop of
NOTE
When in Scan mode, the Monitor Unit will stop scanning and alert you if one of the Camera
Unit is out of range or is not switched ON.
5.7 Audio Warning Volume Setting
This controls the volume of an audio 'beep' sound from the Monitor Unit to alert you when the
unit is low on battery or out of range.
1. Press the Menu button and the menu bar will pop up.
2. Press the LEFT button or
is highlighted.
3. Press the UP button or
, changing every 12 seconds.
RIGHT button until
DOWN button to select high / low / off.
Cam icon is highlighted,
Audio Warning Volume icon
14