Using The Infant Optics Dxr-6 Monitor; Set Up; Night Vision Mode; Talk Mode - Infant Optics DXR-6 User Manual

4. Using the Infant Optics DXR-6 Monitor

4.1 Set Up

Place the Camera Unit in a convenient location (e.g. on a table or a shelf) and point the
camera lens toward the area you want to monitor.
NOTE
Do not place the Monitor Unit within baby's reach. If there is interference with the picture or
sound, try moving the units to different locations, and ensure they are not close to other
electrical equipment.

4.2 Night Vision Mode

The Camera Unit has 8 high-intensity infrared LEDs for picking up clear images in the dark.
When the built-in photo sensor detects a low level of ambient light, the IR infrared LEDs will
automatically activate and the screen on the Monitor Unit will display in black and white. The
(icon) icon will be displayed on the screen.

4.3 Talk Mode

Press and hold the TALK button on the Monitor Unit to talk to your baby through the Camera
Unit's loudspeaker. A icon will be displayed at the top of the LCD screen.

4.4 Sleep Mode (Video OFF with Audio ON)

Short press the POWER ON/OFF/SLEEP button to turn the LCD screen OFF while
keeping the audio ON. This mode conserves power. Short press any button to turn screen
back on.

4.5 Digital Zoom Mode

Press and hold the OK button for 3 seconds to toggle Digital Zoom Mode. An icon
will be displayed at the right bottom of the LCD screen. Pan the picture left/right/up/down
accordingly with the left/right/up/down buttons.
10