2-Sided Printing; Guidelines For Printing On Both Sides Of The Paper; Simultaneous Scanning, Printing And Faxing - Brother MFC-1816 User Manual

Printing

2-sided printing

The supplied printer driver supports manual 2-sided printing.

Guidelines for printing on both sides of the paper

 If the paper is thin, it may wrinkle.
 If paper is curled, turn over the stack, straighten it and then put it back in the paper tray.
 If the paper is not feeding properly, it may be curled. Remove the paper, straighten it and turn over the
stack.
 When you use the manual 2-sided function, it is possible that there may be paper jams or poor print quality.
If there is a paper jam: See User's Guide: Paper Jams. If you have a print quality problem: See User's
Guide: Improving the print quality.
 The machine prints all the even-numbered pages on one side of the paper first. Then, the printer driver
instructs you (with a pop-up message) to reinsert the paper. Before reinserting the paper, straighten it well,
or you may get a paper jam. Very thin or thick paper is not recommended.

Simultaneous scanning, printing and faxing

Your machine can print from your computer while sending or receiving a fax in memory, or while scanning a
document into the computer. Fax sending will not be stopped during the computer printing. However, when
the machine is copying or receiving a fax on paper, it pauses the computer printing operation, and then
continues printing when copying or fax receiving has finished.
1
1
1
1
4