Ohmeda Ohio 2000 Series Operation And Maintenance Manual page 36

11109/93
3-15
63
Figure 3-8
X-ray tray
operation
WARNING: Limit the load placed on X-ray tray 5 lbs. (2.3 Kg) to avoid a
tipping hazard.
WARNING: Never place an infant on the X-ray cassette tray.
1. To help position the X-ray cassette, the tray has detents or stops at
its center position and at normal extension. Gently pull the tray out
allowing gravity to engage the stops. Since the tray removes easily
for cleaning, use caution when pulling it out, and properly support
the tray and any X-ray cassette. The tray can be pulled out on either
side of the warmer bed.
2. To further aid in positioning the X-ray cassette, a location grid pat-
tern is molded into the tray itself. The tray grid markings correspond
to the decal grid markings on the warmer bed side panels. Using the
markings on the side panels as a reference to the infant's location,
position the cassette on the tray so that, when the tray is fully
inserted, the cassette will be directly beneath the infant.
3. With a smooth continuous motion, slide the tray back under the
warmer bed until you feel the "click" when the stops on the slides
engage the tray at the fully inserted center position.
6600-0194-000
A
!
3/0peration
Figure 3-7
Heater Rotation for
X-ray Procedures
Using the tray