Cleaning The Water Inlet Filter - Miele WWF 060 Operating Instructions Manual

Cleaning the water inlet filter

The washing machine has two filters to
protect the inlet valve. You should
inspect the filters approximately every
six months, or more often if there are
frequent interruptions to the external
water supply.
Cleaning the filter in the inlet hose
 First turn off the tap.
 Unscrew the inlet hose from the tap.
 Remove the rubber seal 1 from the
connector.
 Using needle nose pliers, take hold of
the plastic filter bar 2 and remove it.
 Clean the filter.
 Reassemble the appliance in reverse
order.
Cleaning and care
Cleaning the filter in the inlet valve
 Using pliers, carefully loosen the
ribbed plastic nut on the inlet valve
and unscrew.
 Use needle nose pliers to withdraw
the filter by the bar.
 Clean the filter.
 Reassemble the appliance in reverse
order.
After cleaning, turn the tap slowly
and make sure the screw
connections are watertight. If water
leaks, tighten the screw connections.
The filters must be put back in place
after cleaning.
51