Levelling The Machine; Screwing Out And Adjusting The Feet - Miele WWF 060 Operating Instructions Manual

Installation and connection

Levelling the machine

The washing machine must stand
perfectly level on all four feet to ensure
safe and proper operation.
Incorrect installation may increase
electric and water consumption and
may cause the machine to move about.

Screwing out and adjusting the feet

The four adjustable screw feet are used
to level the washing machine. All four
feet are screwed in when the washing
machine is delivered.
 Using the spanner supplied, turn
counter nut 2 in a clockwise direction.
Then turn counter nut 2 together with
foot 1 to unscrew.
68
 Use a level to check that the washing
machine is standing level.
 Hold foot 1 securely with a pipe
wrench. Turn counter nut 2 again
using the spanner supplied until it sits
firmly up against the housing.

There is a danger of the washing
machine moving about.
All four counter nuts must sit firmly
up against the housing. Please also
check this for the feet which did not
need adjustment.