Table of Contents
Advertisement
Cleaning and care
Cleaning the water inlet filter
The washing machine has two filters to
protect the inlet valve. You should in-
spect the filters approximately every 6
months, or more often if there are fre-
quent interruptions to the external water
supply.
Cleaning the filter in the inlet hose
First turn off the stopcock.
Unscrew the inlet hose from the stop-
cock.
Remove the rubber seal 1 from the
recess.
Using pointed pliers, take hold of the
plastic filter bar 2 and remove it.
Clean the filter.
Reassemble in reverse order.
46
Cleaning the filter in the inlet valve
Using pliers, carefully loosen the
ribbed plastic nut on the inlet valve
and unscrew it.
Use pointed nose pliers to withdraw
the plastic filter by the bar.
Clean the filter.
Reassemble in reverse order.
The two filters must be put back in
place after cleaning.
Screw the threaded union securely
back onto the stopcock.
Open the stopcock.
Make sure there is no water leaking
from the threaded union.
Tighten the threaded union.
Advertisement
Table of Contents
