Temperature
with garment care label
symbols
Proofing
105 °F/40 °C
Warm+
Drain/Spin
Quick Rinse
Treating microfibre fabric, ski wear, or table
linens made from mainly synthetic fibres to
provide a finish which is resistant to water and
dirt.
– The items should be freshly laundered and
spun or dried before proofing.
– For best results, the items should be heat-
treated afterwards. This can be achieved by
drying them in the tumble dryer or ironing
them.
– Drain only: Set spin speed to
– Make sure you select the appropriate spin
speed.
For rinsing hand-washed items.
Reduce the final spin speed for items which
crease easily.
Program chart
Item/Tip
Small load (5.5 lb/2.5 kg)
Full load (17.6 lb/8 kg)
No
Full load (17.6 lb/8 kg)
.
39