Zip IP-CAM530 Instruction Manual page 44

ZIP IPC USER MANUAL
Post Recording: After an alarm is triggered, the optional record time for continuous video
recording can be set to 5, 10, 20 or 30 seconds.
Target Size: The parameter scope for detection level includes Small, Medium and Large, with a
default value of Medium. The Small parameter is used for a detection area further away that will
require a smaller detection box. The Large target size will generally require a larger detection box
because the subject will be closer.
Scene: Indoor only.
Enable I/O Out: whether the triggered alarm has I/O output.
Send Email: If an alarm is triggered, an Email will be sent as a notice, with corresponding Emails
set in Remote Setting-Network-Email.
Record: whether a video is recorded.
Rule Number: Only one rule can be set
Rule Switch: Enable / Disable
Rule Type: Normal only.
Method for setting up:
1. Enter the Face Detection interface and set Enable.
2. Click the mouse button in the area where you need to draw the target face detection box and
choose the Rule Number without drawing the pedestrian detection area yet.
3. Enable rule.
4. Now using a mouse create a face detection area. Create a convex quadrilateral yellow box by
dragging the cursor point and clicking on 4 points, which will be connected and form an enclosed
area. In one corner of the area created you will see a small red square. Now click on Save. The save
will only be actioned if the shape is a convex quadrilateral shape. To modify the shape of the drawn
face detection area you can only select the small number box of the area and turn the yellow area
into a red area. You can now click on one of the red circle points of the area to adjust the shape.
5. To delete the face detection area, you can only select its number box and click Delete, while
'Delete All' means to delete all the existing face detection areas if your camera provides more than
one pedestrian detection area.
Note:
1) The set detection area must be able to view a full front view of a face to avoid an invalid
detection and the detection area must cover the whole face in the picture to avoid the failure to
trigger an alarm.
43