Pedestrian Detection - Zip IP-CAM530 Instruction Manual

ZIP IPC USER MANUAL
4.8.4 Pedestrian Detection (PD)
Purpose of Function
The purpose of this option is to draw a box in an area of the picture, so that when a moving object
enters the detection area, the program extracts the moving foreground to analyse whether there is a
human involved. The box must be a convex quadrilateral e.g and not
and must contain the whole body.
Trigger Conditions:
1) Minimum area for targeting movement:
The minimum target areas that can be detected respectively under the detection levels from small
to large, account for about 4.0%-7.4% of the whole picture size. To aid sizing of the detection area
box you will see two red boxes in top left hand corner of the picture. These boxes vary in size when
clicking on the Target size parameter either Small, medium or Large. The minimum target area will
be between the area size between the two red boxes.
2) The pedestrians must be within the scope of the drawn detection area.
3) The pedestrians must be moving.
Switch：Click to Enable or Disable option
Latch Time: The external output alarm latch time can be set to 5, 10, 20 or 30 seconds.
Post Recording: After an alarm is triggered, the optional record time for continuous video
recording can be set to 5, 10, 20 or 30 seconds.
Target Size: The parameter scope for detection level includes Small, Medium and Large, with a
default value of Medium. The Small parameter is used for a detection area further away that will
require a smaller detection box. The Large target size will generally require a larger detection box
because the subject will be closer.
Scene: Indoor only.
Enable I/O Out: whether the triggered alarm has I/O output.
Send Email: If an alarm is triggered, an Email will be sent as a notice, with corresponding Emails
set in Remote Setting-Network-Email.
40