Ftp - Zip IP-CAM530 Instruction Manual

to another value between 1024 and 65535. Modification of the port number will restart the system.
Special Operation Instructions:
For IP cameras in 3MP/4MP/5MP/8MP
by entering
rtsp://<User>:<Password of IP camera>@<IP Address>:<Port No.>/ch01/<x>
Example: rtsp://admin:777777@192.168.0.248:554/ch01/0
Where .... User:Password = User and password set in IP camera
IP address = IP address of IP camera
Port No.
ch01
x
For IP cameras in 2MP series you can call the RTSP stream using e.g VCL player by entering
rtsp://<User>:<Password of IP camera>@<IP Address>:<Port No.>/ <x>
Example: rtsp://admin:777777@192.168.0.248:554/ 0
IP address = IP address of IP camera
Port No.
x

4.3.7 FTP

Click on FTP menu to open the following page. You will need an FTP server to use this.
Note if FTP is switched on then the Email service will not run.
FTP: FTP service setting - used with alarm function to upload images or videos to an FTP server.
FTP: Enable or disable it.
User Name: The user name for access to FTP service
Password: The password for access to FTP service
FTP Server: Enter the IP address of FTP server.
Port: FTP service port number; the default number is 21.
Transmit Images: Click on box to transfer images.
series you can call the RTSP stream using e.g VCL player
= RTSP port set in IP camera
= number of channels (set to 01 as default for IP camera)
= 0 (mainstream), 1(substream), 2 (mobile phone stream)
= RTSP port set in IP camera
= 0 (mainstream), 1(substream), 2 (mobile phone stream)
25
ZIP IPC USER MANUAL