E-Mail Configuration - Zip IP-CAM530 Instruction Manual

Audio: Enable audio for each bit stream.
I frame interval: The I frame interval is the number of frames before a new reference frame is
created. You start with encoding a full frame and then holding changes to that frame on the next
frame until the count is reached. The default setting is 50 for mainstream, 20 for substream and 12
for mobile stream. Note that lag time issues may occur when too many reference frames are set or
alternatively when too many changes occur across each non reference frame. Therefore individual
tests will provide the most accurate setting.
Bitrate control: Set constant (CBR) or variable bitrate (VBR). Although VBR is generally the best
option regarding network bandwidth use, tests show that overall CBR is the recommended setting.
Bit stream: Set bit stream value by choosing fixed value or customising it.
Note: Range of Main bit stream is 256-8192 Default = 4096
Range of Sub-bit stream
Range of Mobile bit steam is
Video encoding and encoding level are unavailable in setting page of IP camera of 2MP Series.

4.3.3 E-Mail Configuration

If the IP camera has Email options, then this can be used, but it is only applicable to this camera
channel. The NVR or DVR used, may have a global Email facility that avoids replication for each
channel, so this option may not be the best option to use.
is 128-4096 Default = 1024
8-1536 Default = 256
Test Email Settings
22
ZIP IPC USER MANUAL