Installation; Antenna Settings - Opticum HD AX 150 User Manual

3. Installation

You should install the receiver when powering on your product for the first time
after purchase.
Tip: The default password is 0000. If you have forgotten your password, please
contact your local product distributor.

3.1 Antenna Settings

Antenna Settings allows you to configure the antenna setting parameters.
1. Satellite: Highlight the satellite you
want to search.
2.Transponder:Press the VOL+/VOL-
button to change the TP.
3. LNB Type: Press the VOL+/VOL-
button to change the LNB frequency.
4. LNB Power: Press the VOL+/VOL-
button to select the required LNB power.
5. 22kHz: Press the VOL+/VOL-
button to select ON, OFF or Auto.
6. DiSEqC 1.0: Press the VOL+/VOL- button to select the required DiSEqC1.0
input.
7. DiSEqC 1.1: Press the VOL+/VOL- button to select the required
DiSEqC1.1 input.
8. Motor: Press the VOL+/VOL- button to select DiSEqC1.2 or USALS.
9. Scan Mode: Press the VOL+/VOL- button to select ALL Channels & FTA
Channels & TV Channels & Radio Channels & FTA TV Channels & FTA Radio
Channels which you want to scan.
10. Start search: Press the VOL+/VOL- button to select Satellite & Multi-Sat &
Blind scan & Transponder & Multi-Transponder which you want to start search.
7