Table of Contents
Advertisement
Installation
Plug in the STB. Then press the "power" button on the remote control or the
"Standby" button on the STB Front Panel. The Main Menu will display various
functions of the STB or you can select with direction buttons on the
remote control.
1 Installation
Your STB can be easily installed by using
"Installation" Menu.
Plug in the STB, and power on, to get start the
STB, please go to installation menu by pressing
"Menu" button on the remote control
1.1 LNB Setting
Selecting your installed Satellite, and press
direction buttons to set all the other figures such
as LNB type; Frequency; 22 KHz; DiSEqC control;
LNB Power and so on, then to save the settings.
1.2 Satellite List
Add satellite
Press the red button to add the new satellite to
this STB.
Edit Satellite
Press the green button. You can view the satellite
information and edit the satellite
Delete satellite
Press the yellow button to delete the satellite from this STB forever.
13
Hide quick links:
Advertisement
Table of Contents
