Installation; Powering On; Antenna Settings - Opticum HD X406p User Manual

4. Installation

After connecting antenna you should install the receiver after powering on your
product for the first time after purchase.
Tip: The default password is 0000. If you have forgotten your password, please
contact your local product distributor.

4.1 Powering On

1. Connect the power cord of the product to a wall outlet.
2. Ensure the ON/OFF switch at the rear of the product is switched to ON.
3. Power on by pressing the STANDBY button on the remote control or the
STANDBY button at the front of the product.

4.2 Antenna Settings

Antenna Settings allows you to configure the antenna setting parameters.
Menu->INTALLATION->Antenna Settings
1. Satellite: Displays currently chosen
satellite. Press the VOL+/VOL- button
to change.
2. Transponder (TP for short): Press
the VOL+/VOL- button to change the
TP.
3. LNB Type: Press the VOL+/VOL-
button to change the LNB frequency.
14