Table of Contents
Advertisement
Recommended Accessories ..............................1
General Warnings............................................2
Operating on Slopes........................................2
Preparation ......................................................2
Operating Safety..............................................2
Features & Controls ............................................3
Blade Angle Control.........................................3
Attachment Lift.................................................3
Checks Before Starting....................................4
Engine & Ground Speed Selection..................4
Transporting.....................................................4
Starting & Stopping .........................................4
Changing Angle of the Blade...........................5
Dozing Tips......................................................5
Snow Plowing Tips ..........................................5
Storage .................................................................5
Recommended Accessories
For best performance, it is recommended to use tire chains and two rear wheel weights. The maximum weight
added to the tractor should not exceed 35 lbs. per wheel.
For operation on slopes greater than 15% (8.5°), Quick Tach Weights, tire chains, and wheel weights are recom-
mended. Never operate on slopes greater than 17.6% (10°).
© Copyright 2000 Simplicity Manufacturing, Inc.
All Rights Reserved. Printed in USA.
TP 100-2374-01-AT-SMA
Table of Contents
Maintenance & Normal Care Schedule..............6
Schedule for Normal Care ...............................6
Lubricate the Dozer Blade ...............................6
Adjustments.........................................................7
Skid Shoe Adjustment .....................................7
Spring Tension.................................................7
Lift Height Adjustment .....................................8
Dozer Components..........................................9
Hitch Components .........................................10
Assemble Blade.............................................11
Assemble Lift Rod .........................................12
Install Blade ...................................................12
Install Angling Control Rod ............................13
Attaching & Removing the Hitch & Blade
Removing & Attaching Dozer Blade ..............14
& Torque Specifications....................................15
NOTE: In these instructions, "left" and "right" are
referred to as seen from the operating position.
1
Advertisement
Table of Contents
