Disassembly Procedure - Mitsubishi Electric Mr.Slim PLA-A24EA7 Service Manual

12

DISASSEMBLY PROCEDURE

PLA-A12EA7
PLA-A30EA7
OPERATING PROCEDURE
1. Removing the filter
(1) Slide the knob of air intake grille toward the arrow to
open the air intake grille. (See Figure 1.)
(2) Pull down the lever of the air intake grille to remove the
filter. (See Figure 2.)
2. Removing the air intake grille
(1) Slide the knob of air intake grille toward the arrow to
open the air intake grille. (See Figure 1.)
(2) Remove the hook of drop prevention strap from the
panel.
(3) Remove the air intake grille.
3. Removing the electrical box cover
(1) Remove the air intake grille and the filter. (Refer to
procedure 2.)
(2) Loosen the 2 electrical box cover fixing screws (M4×10)
approximately 2 to 3 mm. (See Photo 1.)
(3) Slide the electrical box cover toward the arrow to remove.
(See Photo 2.)
OCH640C
PLA-A18EA7
PLA-A36EA7
Hook of drop
prevention strap
PLA-A24EA7
PLA-A42EA7
PHOTOS/FIGURES
Figure 1
Air intake grille
Figure 2
Photo 1
Photo 2
37 37
Be careful when removing heavy parts.
Knob
Intake grille
Electrical box cover
Electrical box cover
Slide
Grille
Filter
k