Mitsubishi Electric Mr.Slim PLA-A24EA7 Service Manual page 7

Display
The main display can be displayed in 2 different modes: "Full" and "Basic". The initial setting is "Full". To switch to the "Basic" mode, change the
setting on the Main display setting. (Refer to operation manual included with remote controller.)
<Full mode>
* All icons are displayed for explanation.
2 3 4 5 6
6
7
8
9 Room
0
Set temp.
Cool
83
1
1
Mode Temp.
@
1 Operation mode
Indoor unit operation mode appears here.
2 Preset temperature
Preset temperature appears here.
3 Clock (See the Installation Manual.)
Current time appears here.
4 Fan speed
Fan speed setting appears here.
5 Button function guide
Functions of the corresponding buttons appear here.
6
Appears when the ON/OFF operation is centrally controlled.
7
Appears when the operation mode is centrally controlled.
8
Appears when the preset temperature is centrally controlled.
9
0
Appears
1 Room temperature (See the Installation Manual.)
Current room temperature appears here.
2
Appears when the buttons are locked.
Most settings (except ON/OFF, mode, fan speed, temperature) can be made from the Menu screen.
(Refer to operation manual included with remote controller.)
OCH640C
789
3
Fri
)
83
!
4
Fan
2
5
7 7
<Basic mode>
2
Cool Set temp.
83
1
Mode Temp.
5
3
Appears when the ON/OFF timer, Night setback, or Auto-OFF timer
function is enabled.
appears when the timer is disabled by the centralized control
system.
4
Appears when the Weekly timer is enabled.
5
Appears while the units are operated in the energy-saving mode. (Will
not appear on some models of indoor units)
6
Appears while the outdoor units are operated in the silent mode.
7
Appears when the built-in thermistor on the remote controller is acti-
vated to monitor the room temperature (1).
appears when the thermistor on the indoor unit is activated to
monitor the room temperature.
8
Appears when the units are operated in the energy-saving mode with
3D i-see Sensor.
9
Indicates the vane setting.
)
Indicates the louver setting.
!
Indicates the ventilation setting.
@
Appears when the preset temperature range is restricted.
3
Fri
4
Fan