Mitsubishi Electric Mr.Slim PLA-A24EA7 Service Manual page 41

OPERATING PROCEDURE
10. Removing the drain pan
(1) Remove the electrical box. (See photo 3 and refer to 6.)
(2) Remove the bell mouth (tapping screw 4×10 : 2 screws).
(See Photo 5.)
(3) Remove the drain pan (screw M5×10: 4 screws).
11. Removing the pipe temperature thermistor/liquid (TH2)
and the condenser/evaporator temperature thermistor
(TH5)
(1) Remove the drain pan (Refer to procedure 10.) and loos-
en the 2 clamps of the coil plate. (See Photo 9.)
(2) Remove the coil plate (tapping screw 4×10: 2 screws).
(3) Disconnect the pipe temperature thermistor/liquid (TH2)
and the condenser/evaporator temperature thermistor
(TH5) from the holder.
OCH640C
PHOTOS/FIGURES
Photo 12
Drain pan
Photo 13
Pipe temperature/liquid
thermistor (TH2)
41
Drain pan
Drain pan
Condenser/evaporator
temperature thermistor (TH5)