Call Setup - Haier M160 User Manual

Sets the incoming call ring, message tone, and key tone.
1. Select;
2. Press Ok key.
Incoming call
1. Press Up or Down key to scroll through the ring tones.
2. Press Ok key to confirm the selection.
Message
1. Press Up or Down key to scroll through the SMS tones.
2. Press Ok key to confirm the selection.
Key tone
1. Select;
2. Press Ok key.
Volume
Sets the volume level of the call, ring tone, and key tone.
1. Select;
2. Press Ok key.
3. Press Up or Down key to adjust the volume level to your
desired setting.
4. Press Ok key to confirm.
Alert type
1. Select;
2. Press Ok key to confirm.

4. Call setup

1. In the Settings display, select Call setup.
Call divert, Call barring, Call waiting, Auto redial, or
2. Select;
Caller ID.
Call divert
All calls, If busy, If no reply, or If out of reach.
1. Select;
2. Press Ok key.
Check status, Activate, or Deactivate.
3. Select;
enter the call divert phone number.
4. Press Ok key.
Call barring
Incoming call, Message, or Key tone.
On or Off.
Call, Ring tone, or Key tone.
Ring only, Vibrate only, or Vibrate and ring.
26
To activate,