Warning
!
Danger due to lightning strikes
Installing this lightning protector between an antenna and a
SCALANCE W7xx is not adequate protection against a lightning
strike. The LP798-1N lightening protector only works within the
framework of a comprehensive lightning protection concept. If you
have questions, ask a qualified specialist company.
Procedure
Remove the protective caps from the N connector of the antenna and
screw down the flexible connecting cable. The tightening torque at the
N connector is 1.7 Nm.
Note
Keep the protective caps
Keep protective caps taken out for later use.
Compact Operating Instructions ANT793-6MN
A5E01116925B-05
English
29