Download  Print this page

General Safety Notices - Siemens SIMATIC NET ANT793-6MN Operating Instructions Manual

Omni antenna 5 ghz
Hide thumbs



General safety notices

Danger due to lightning strikes
Antennas installed outdoors must be within the area covered by a
lightning protection system. Make sure that all conducting systems
entering from outdoors can be protected by a lightning protection
potential equalization system.
When implementing your lightning protection concept, make sure you
adhere to the VDE 0182 or IEC 62305 standard.
Improper use
The device (and its components) may only be used for the application
described in the catalog or the operating instructions. It may only be
combined with devices or components of other manufacturers that
have been approved and released by Siemens.
Correct and safe operation of the device is guaranteed only when it is
transported, stored, set up, installed, used and maintained according
to the recommendations.
Qualified personnel
Only qualified personnel should be allowed to install and work on
this equipment. Qualified persons in the sense of the safety-related
notices in this manual are defined as persons who are authorized to
commission, to ground, and to tag circuits, equipment, and systems in
accordance with established safety practices and standards.
Compact Operating Instructions ANT793-6MN




  Also See for Siemens SIMATIC NET ANT793-6MN

  Related Manuals for Siemens SIMATIC NET ANT793-6MN