Upgrading The Wlp Software - GO Networks WLP Technical Manual

Periodically, new software upgrades are released in order to provide
feature enhancements and maintenance. Following is one method you can
use to update the software:
Initiate the network download using a TFTP download server.
g.
Note: The WLP unit has two banks in the Flash memory (sw0, sw1).
By default, the WLP will startup the software image from the
sw1 bank.
Initially, when you download the new software image, the older version is
automatically transferred to sw0 bank, and the new software image is
transferred to sw1 bank.
Upgrade Example
WLP>
WLP> import image from tftp [IP ADDRESS] [File Name]
WLP> show messages software-download
Software download started.
Verifying server and path.
TFTP path OK.
Flash erase started.
Flash erase finished.
Download started from 192.168.30.103 gapsw-1.3.5.11995-Beta-
28.02.2006@180244.img.
Download finished.
Verification started.
Verification passed.
Writing to environment.
Software download finished.
Note: It is important to reload the system after upgrading the WLP
software for the changes to be applied and the new software to
become operational.
You may need to copy a new image to the Flash memory whenever a new
image or maintenance release becomes available.
All contents are Copyright © 2006 GO Networks, Inc. All rights reserved.

Upgrading the WLP Software

- Page 25 of 31-