Table of Contents
Advertisement
Keep part of your body in contact with the metal server chassis to dissipate the static charge while
handling the components.
Avoid moving around unnecessarily.
Hold the server components (especially boards) only by the edges.
Place the server components on a grounded, static-free surface.
Use a conductive foam pad if available but not the component wrapper.
Do not slide the components over any surface.
2.7 Cooling and Airflow
CAUTION
For proper cooling and airflow, always install all access covers before turning on the system.
Operating the system for longer than five minutes without the covers in place can cause overheating and damage to system
components.
2.8 Battery
CAUTION
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
2.9 Network Connecting
CAUTION
This equipment is indoor use and all the communication wirings are limited to inside of the building.
13
Advertisement
Table of Contents
