Table of Contents
Advertisement
4. BIOS and Jumper Setting
4.1 BIOS
This chapter provides information on the BIOS Setup program and allows you to configure the system for
optimum use. You may need to run the Setup program when:
An error message appears on the screen during the system booting up, and requests you to run SETUP.
You want to change the default settings for customized features.
4.1.1 Entering Setup
Power on the computer and the system will start POST (Power On Self Test) process. When the message below
appears on the screen, press <F2> key to enter Setup.
If the message disappears before you respond and you still wish to enter Setup, restart the system by turning it
OFF and On or pressing the RESET button. You may also restart the system by simultaneously pressing <Ctrl>,
<Alt>, and <Delete> keys.
NOTICE
The items under each BIOS category described in this chapter are under continuous update for better system
performance. Therefore, the description may be slightly different from the latest BIOS and should be held for
reference only.
Press F2 to enter SETUP
24
Advertisement
Table of Contents
