3.2.4 PCI Add-on Card
WARNING
Power off power supply completely when adding or removing any expansion card and other system components.
Failure to do so may cause severe damage to both your motherboard and expansion card.
3.2.4.1 PCI Add-on Card Installation
① Loosen the screw as shown below.
② Pull the PCI bracket down and remove the blank PCI away.
③ Insert the express card into the riser card slot.
④ Pull the PCI bracket up to original position and fasten it to the system.
Riser Card
Blank PCI
Riser Card Slot
Express Card
23