Table of Contents
Advertisement
System Event Log
This setting shows the real-time system event logs on the system monitor sensor.
Dynamic or Static IP Config
This setting is used to configure your dynamic (temporary) or static (permanent) network IP. Setting to
[DHCP] (Dynamic Host Configuration Protocol) allows the network IP to be automatically assigned.
IP Address, IP Subnet Mask, Default Gateway
Use these settings to set up the IP address, IP subnet mask, and default gateway for your system network.
These settings appear only when the
(Optional)
Dynamic or Static IP Config
is set to [Static IP] or [No Change].
38
Advertisement
Table of Contents
