ADJ PAR Z MOVE User Instructions page 9

Par Z Move
NOTICE: The suitable enviromental temperature for this lighting fixture is between -25˚ C to 45˚ C.
Do not place this lighting fixture in an enviroment where the temperatures are under or above the
temperatures stated above. This will allow the fixture to run at its best and help prolong the fixture
life.
4. SAFETY CABLE
ATTACHMENT POINTS
Screw one clamp each via a M12 screw and nut into the Omega brackets. Insert the quick-lock fasteners
of the Omega brackets into the respective holes on the bottom of the Par Z Move. Tighten the quick-
lock fasteners fully clockwise. Pull a safety cable through the safety cable attachment points located
on the base plate and over the trussing system or a safe fixation spot. Insert the end in the carabine
and tighten the safety screw.
ADJ Products, LLC - www.adj.com - Par Z Move User Manual Page 8
1. CLAMPS
2. OMEGA BRACKETS
3. QUICK LOCK FASTENERS
4
4
Installation