Table of Contents
Advertisement
4.2
WATER SYSTEM & DAIRY CIRCUIT HOT WATER
FLUSHING (cleansing agents are NOT used)
To cleanse the Water System circuit with Hot Water:
1. Place an empty mug onto the drip tray.
2. Without a K-CUP in place, select Quick Clean from the
main screen.
3. Select the Coffee Clean option.
4. Select the green check mark to start the cycle; the cycle
will automatically end after dispensing 11 oz. of water.
5. If necessary, repeat this procedure until the water
supplied runs clear.
To cleanse the Dairy Circuit with Hot Water:
1. Place an empty mug onto the drip tray.
2. Without a K-CUP in place, select Quick Clean from the
main screen.
3. Select the Soluble Clean option.
4. Select the green check mark to start the cycle; the cycle
will automatically end after dispensing 10 oz. of water.
5. If necessary, repeat this procedure until the water
supplied runs clear.
4.3
CLEANING OF DRIP TRAY
1. Remove the drip tray by pulling it toward the front of
the brewer.
2. Remove the drip tray plate.
3. Empty the drip tray and clean by submerging the drip
tray in Rinza solution followed by sanitation by soaking the
drip tray in a solution of Complete Café solution, as
directed in section "FREQUENCY AND INTENSITY OF
CLEANING".
4. At the end of cleaning, re-fit the drip tray plate and drip
tray onto the brewer.
4.4
CLEANING OF K-CUP®
POD BIN
1. After having removed the drip tray, lift the lever and
remove the K-Cup® pod bin by pulling it towards the
front of the brewer.
2. Clean by submerging the K-Cup® pod bin in Rinza
solution followed by sanitation by soaking the K-Cup®
pod bin in a solution of Complete Café solution, as
directed in section "FREQUENCY AND INTENSITY OF
CLEANING".
3. At the end of cleaning, replace the K-Cup® pod bin and
the drip tray into the brewer.
4.5
CLEANING THE MIXER
AND BLENDER UNIT
1. Open the right side door and manually rotate the
retaining ring of the mixer in counterclockwise direction
until it stops.
English
21
Hide quick links:
Advertisement
Table of Contents
