Table of Contents
Advertisement
2
UNPACKING AND INSTALLATION
2.1
PACKAGING CONTENTS
The brewer is delivered in a special customised box. The
contents of the packaging are:
• Brewer;
• Quick start guide;
• Water mains connecting tube.
• Warranty Card
Check that nothing is missing and that the brewer and the
packaging are not damaged. In case of damage or missing
pieces, contact your Keurig Authorized Distributor or
Keurig Customer Care immediately before installing.
2.2
UNPACKING THE BREWER
Open the box, lift and remove the brewer complete with
its protections from the box, and then position it on a
stable surface.
2.3
INSTALLATION
Before installing the brewer, read the paragraph
"IMPORTANT SAFEGUARDS" thoroughly.
2.4
ELECTRIC CONNECTION
Before connecting the brewer to the electric system, make
sure there is GFCI proper voltage and earth ground.
Furthermore, check the product ratings correspond to
those of the electric system.
2.5
WATER SUPPLY
CONNECTION
The machine is to be supplied with drinking water,
considering the applicable provisions of the country where
it is installed. For the best tasting gourmet coffee, tea, hot
cocoa, or other beverage, Keurig requires the use of
filtered water in the brewer. We recommend the
Omnipure Filter Kit, Keurig (# 5572).
Check
characteristics
necessary, install a softener
filter
(not
standard).
When connecting the brewer to the water supply use
accessories supplied by the manufacturer.
Do not use previously used pipe or joints.
The connection to the
water
supply
carried
out
that the maximum inlet
pressure is 72,52 psi.
English
the
water
and,
if
supplied
as
must
be
considering
11
Hide quick links:
Advertisement
Table of Contents
