Preparing The Brewer For Storage Or Transport - Keurig K4000 Operation And Maintenance

English
Make sure that the end of the
tube cut in a "V" shape is the one
inserted in the container with
water and descaling solution.
Place a container under the dispensing spout.
Start selection (for ex. 12 oz cappuccino) to introduce the
descaler into the circuit of the machine.
Repeat this step until the container with water and
descaling solution is empty.
Rinse the brewer hydraulic circuit by inserting the tube in
a container filled with water and repeating the selection
(for example 12 once cappuccino) for six times.
After the rinsing, disconnect the tube used for descaling
and reconnect in its original position the one previously
disconnected .
After completing the descaling cycle, empty the containers
used to collect the liquids during descaling.
The descaling solution is to
be disposed of according
to the
instructions
regulations in force in the
country of use.
4.10 PREPARING THE BREWER FOR
STORAGE OR TRANSPORT
When the brewer is not going to be used for a long period
of time, it is advisable to:
1. Power it off and unplug it
2. Disconnect the brewer from the water supply
It is also advisable to turn off the brewer each day when
not in use for energy saving.
4.10.1 Empty Water System
With no K-Cup® pod in place, proceed to empty the
water system in the following way:
1. Close the water supply tap;
2. Place a 12 oz. or larger ceramic mug on the drip tray.
3. Enter settings menu with the proper password and
select "Drain System".
26
manufacturer's
and/or the