Siemens RDF800KN Manual page 3

Applications
Remote configuration
Siemens
Building Technologies
• Purge function together with 2-port valve in a 2-pipe changeover system
• Reminder to clean fan filters (adjust with P62)
• Floor heating temperature limitation
• Reload factory settings for commissioning and control parameters
• Wizard function for easy commissioning via HMI
• KNX bus (terminals CE+ and CE-) for communication with Synco or KNX
compatible devices
• Display of time of day via KNX bus
• Display of outdoor temperature via KNX bus on INFO page
• Time scheduling and central control of setpoints via KNX bus
• With a Synco RMx7xx controller, the energy demand signal of the thermostat is
used to optimize energy supply
The thermostats support the following applications, which can be configured using
the DIP switches on the inner side of the thermostat's front panel or a
commissioning tool.
All DIP switches need to be set to OFF (factory setting) to select an application via
commissioning tool.
Remote configuration, via commissioning tool (factory
setting)
• Synco ACS
• ETS4
RDF800KN...
Touch Screen Flush-mount Room Thermostats with KNX Communications
DIP switches
3 / 20
CB1N3174en
2014-09-10