Summary of Contents for Sunny Health & Fitness SF-T1407M
Page 1
MANUAL WALKING TREADMILL SF-T1407M USER MANUAL IMPORTANT! Please retain owner’s manual for maintenance and adjustment instructions. Your satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL YOU HAVE CONTACTED US: support@sunnyhealthfitness.com or 1- 877 - 90SUNNY (877-907-8669).
IMPORTANT SAFETY INFORMATION We thank you for choosing our product. To ensure your safety and health, please use this equipment correctly. It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained, and used properly.
PARTS LIST Description Spec. Qty. Description Spec. Qty. Main Frame Running Board Running Belt Front Roller Left Flywheel Cover Rear Roller Right Flywheel Cover Side Rail Right Upright Support Anti-slip Cloth Left Upright Support Left Side Rail Block Handlebar Right Side Rail Block Decorative Cover Foot Cover Computer...
ASSEMBLY INSTRUCTIONS We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907-8669). STEP 1: Note: complete steps that involve assembling heavy components, have a second person help with the assembly process. For your safety, do NOT attempt to complete these steps on your own.
Page 6
We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907-8669). STEP 3: Attach the Main Frame (No. 1) to the Right & Left Upright Supports (No. 4 & No. 5) using 2 Flat Washers (No.
LUBRICATING THE TREADMILL IMPORTANT NOTE: You will need to lubricate your treadmill before the first use! RUNNING BELT & TREADMILL LUBRICANT: Lubricating the Running Board (No. 26) and Running Belt (No. 2) is essential as the friction affects the life span and operations of the treadmill. Inspect the Running Board (No. 26) and Running Belt (No.
MAINTENANCE INSTRUCTIONS General cleaning will help to prolong the life and improve performance of your treadmill. Keep the unit clean and maintained by dusting the components on a regular basis. Cleaning the two exposed sides of the Running Belt (No. 2) will prevent dust from accumulating underneath. Keep your running shoes clean so that dirt from the shoes does not wear the Running Board (No.
FOLDING INSTRUCTIONS Folding: To fold the treadmill, turn the Lock Knob (No. 10) counter-clockwise and remove it from the lower hole of the Left Upright Support (No. 5). Raise the rear end of the Main Frame (No. 1) all the way up to a vertical position, then insert the Lock Knob (No. 10) to the upper hole of Left Upright Support (No.
EMERGENCY DISMOUNT Be aware of your body’s signals. Incorrect or excessive exercise can damage your health. If you feel dizziness, nausea, chest pain, back pain, or other health symptoms, stop the workout immediately and consult your physician before continuing. Stand feet on the staging platforms (as shown in the figure below) and hold the handlebars tightly. HOW TO MOVE THE TREADMILL Before attempting to move the treadmill, please make sure that it has been properly folded.
EXERCISE COMPUTER SPECIFICATIONS: TIME---------------------------------------------------- 00:00-99:59 MIN: SEC SPEED------------------------------------------------- 0.0-999.9 M (Miles) /H DISTANCE-------------------------------------------- 0.0-999.9 M (Miles) CALORIES-------------------------------------------- 0.0-999.9 KCAL FUNCTION KEY: MODE: Press to select a function. (Time, Speed, Distance, Calories). Press and hold the MODE button for 3 seconds to reset time, distance, and calories. OPERATION PROCEDURES: AUTO ON/OFF: If you begin exercising or press the MODE button, the computer will turn on.
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SUGGESTED ACTION There is an object under the main Remove the object. frame of the treadmill, or the Move the treadmill to level ground. Base is unstable. ground isn’t level. The lock knob is loose. Tighten the lock knob. Hardware: nuts, bolts, or screws Inspect hardware and tighten.