Tail/Brake Light; Replacing A Front Turn Signal Light Bulb - Yamaha Y15ZR Owner's Manual

Tail/brake light

This model is equipped with an LED-
type tail/brake light.
If the tail/brake light does not come on,
have a Yamaha dealer check it.
Periodic maintenance and adjustment
EAU24182
Replacing a front turn signal
light bulb
NOTICE
It is advisable to have a Yamaha
dealer perform this job.
1. Place the vehicle on the center-
stand.
2. Remove panel A and B. (See page
7-8.)
3. Remove the turn signal light bulb
socket (together with the bulb) by
turning it counterclockwise.
1
1. Turn signal light bulb
4. Remove the burnt out bulb by
pulling it out.
5. Insert a new bulb into the socket.
7-34
EAUV0560 6. Install the socket (together with
the bulb) by turning it clockwise.
7. Install the panels.
ECA10671
7