Yamaha Y15ZR Owner's Manual page 26

Instrument and control functions
Tripmeters mode
4
1
1. Tripmeter
The tripmeters shows the total dis-
tance traveled since they were last re-
set.
To reset a tripmeter, push the "RE-
SET/SELECT" button for one second.
TIP
The odometer will lock at 999999
and cannot be reset.
The tripmeters will reset and con-
tinue counting after 9999.9 is
reached. To reset the tripmeters,
while it is being displayed, press
the "RESET/SELECT" button for
at least one second.
Clock mode
1
1. Clock
The clock uses a 12-hour time system.
To set the clock
1. With the display in the clock
mode, push the "RESET/SELECT"
button for two seconds.
2. When the hour digits start flash-
ing, use the "RESET/SELECT"
button to set the hours.
3. Push the "RESET/SELECT" but-
ton for two seconds, and the min-
utes will start flashing.
4. Use the "RESET/SELECT" button
to set the minutes.
5. Push the "RESET/SELECT" but-
ton for two seconds to start the
clock.
4-7
TIP
If you do not push the "RESET/SE-
LECT" button for 90 seconds, the
clock will not be set and will return to
the prior time.
Instantaneous fuel consumption
mode
1
1. Instantaneous fuel consumption display
Shows the current fuel consumption
when the vehicle is traveling at least 10
km/h.
There are two display modes: "km/L"
and "L/100 km".
To switch the instantaneous fuel con-
sumption display between "km/L" and
"L/100 km", push the "RESET/SE-
LECT" button for one second.