Cast Wheels; Adjusting The Clutch Lever Free Play - Yamaha Y15ZR Owner's Manual

Table of Contents

Advertisement

Cast wheels

To maximize the performance, durabil-
ity, and safe operation of your vehicle,
note the following points regarding the
specified wheels.
The
wheel
rims
should
checked for cracks, bends, warp-
age or other damage before each
ride. If any damage is found, have
a Yamaha dealer replace the
wheel. Do not attempt even the
smallest repair to the wheel. A de-
formed or cracked wheel must be
replaced.
The wheel should be balanced
whenever either the tire or wheel
has been changed or replaced. An
unbalanced wheel can result in
poor performance, adverse han-
dling characteristics, and a short-
ened tire life.
Periodic maintenance and adjustment
EAU21963
Adjusting the clutch lever free
play
2
(a)
be
(b)
1
1. Locknut
2. Clutch lever free play adjusting bolt
The clutch lever free play should mea-
sure 8.0–12.0 mm (0.31–0.47 in) as
shown. Periodically check the clutch
lever free play and, if necessary, adjust
it as follows.
1. Remove cowling A. (See page
7-8.)
2. Loosen the locknut.
3. To increase the clutch lever free
play, turn the clutch lever free play
adjusting bolt in direction (a). To
decrease the clutch lever free
play, turn the adjusting bolt in di-
rection (b).
7-20
EAU65840
TIP
If the specified clutch lever free play
could be obtained as described above,
skip steps 4–7.
4. Fully turn the adjusting bolt at the
clutch lever in direction (a) to loos-
en the clutch cable.
5. Loosen the locknut at the crank-
case.
(b)
1
(a)
2
1. Locknut
2. Clutch lever free play adjusting nut
6. To increase the clutch lever free
play, turn the clutch lever free play
adjusting nut in direction (a). To
decrease the clutch lever free
play, turn the adjusting nut in di-
rection (b).
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents