Safety Instructions; Specifications - Behringer COMPRESSOR/LIMITER CL9 Instructions

◊
The CL9 has no on/off switch. As soon as you insert the plug into the in connector,
the CL9 is on. When not in use, remove the plug from the in connector. This extends
the life of the battery.
The SERIAL NUMBER is located at the underside.

2. Safety Instructions

Do not use near water, or install near heat sources. Use only authorized attachments/accessories.
Do not service product yourself. Contact our qualified servicing personnel for servicing or repairs,
especially when power supply cord or plug is damaged.
3. Warranty
Please register your new BEHRINGER equipment right after your purchase by visiting
http://behringer.com and read the terms and conditions of our warranty carefully.

4. Specifications

In
Connector
Impedance
Out
Connector
Impedance
Power Supply
BEHRINGER PSU-SB
USA/Canada
Europe/U.K./
Australia
China
Korea
Japan
MUSIC Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or
statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of
their respective owners. MIDAS, KLARK TEKNIK, LAB GRUPPEN, LAKE, TANNOY, TURBOSOUND, TC ELECTRONIC, TC HELICON, BEHRINGER, BUGERA and COOLAUDIO
are trademarks or registered trademarks of MUSIC Tribe Global Brands Ltd. © MUSIC Tribe Global Brands Ltd. 2018 All rights reserved.
1/4" TS
500 kΩ
1/4" TS
1 kΩ
9 V��, 100 mA regulated
120 V~, 60 Hz
230 V~, 50 Hz
220 V~, 50 Hz
220 V~, 60 Hz
100 V~, 50/60 Hz
COMPRESSOR/LIMITER CL9
Power connector 2 mm DC jack,
negative center
Battery 9 V type 6LR61
Power consumption 30 mA
Physical/Weight
Dimensions approx. 2 1/ 8 x 2 3/4 x 4 4/ 5 "
(H x W x D) approx. 54 x 70 x 123 mm
Weight approx. 0.73 lbs / 0.33 kg
BEHRINGER is constantly striving to maintain the
highest professional standards. As a result of these efforts,
modifications may be made from time to time to existing
products without prior notice. Specifications and appearance
may therefore differ from those listed or shown.